WMicS2 RX2 UHF Wireless Receiver

Descripción

Audio Godox WMicS2 RX2 UHF Wireless Receiver The Godox WMicS2 RX2 UHF Wireless Receiver is suitable for use with your DSLR / mirrorless camera or smartphone equipped with a 3.5mm TRS or TRRS port. It is a wireless receiver that you can attach to your camera or clip to your clothing, ideal for vlogs or interviews on the go. This receiver has two channels and can be used in combination with one or two WMicS2 clip on microphone/transmitters (sold separately), creating a portable solution for your one or two person interviews up to 656 feet away. The receiver connects to your device’s 3.5mm TRS or TRRS port and has an additional 3.5mm headphone jack that allows you to monitor your audio in real time. The built in 770mAh lithium battery allows you to record for long periods of time. The receiver has 1/4′ 20 thread for your camera or on your clothing using the included rear clip and magnetic attachment. The OLED display shows information about connectivity, mode, battery level, frequency signal and volume., Model: WMicS2 RX2 Group: A/B Channel: 96 (Group A: 48; Group B: 48) RF frequentiebereik: 514.56MHz 553.92MHz Audio frequency range: 40Hz 18KHz Audio Delay: 12ms Audio Input Port: 3.5mm Lithium Battery Capacity: 770mAh Type C Input Parameters: 5V/0.4A Working Temperature Range: 10~45℃ Receiving Distance: Barrier free receiving distance: 200m, Barriered receiving distance: 60m Signal Noise Ratio: ≈70dB Receive Sensitivity: 95dBm Distortion: Below 3% Dimension: 65.8×58.4×20.5mm (Antenna length: 65mm) , 1x WMicS2 RX2 1x Type C to USB Cable 1x Magnetic Plate 1x Back clip 1x 3.5mm TRS TRRS Audio Connect Cable 1x 3.5mm TRS TRS Audio Connect Cable